JR NEX E6-550 Assembly Kit rc helicopter

1.Overall length : 986mm / 38.82 in 2.Overall width (Landing strut) : 158mm / 6.22 in 3.Overall height : 321mm / 12.64 in Unique control system allowing sub trim free adjustment(STF)Ample space for a high capacity batteryCarbon frame, tail boom, finsFBL rotor head with metal main blade gripsCarbon main rotor and tail rotor bladesMetal tail rotor grips with thrust bearingMain system components are pre-assembledLight weight and high rigidity frameFRP painted canopyShaft drive tailOverall length : 986mm / 38.82 inOverall width (Landing strut) : 158mm / 6.22 inOverall height : 321mm / 12.64 inGross weight : 2,300g / 5.07 lb or moreMain rotor diameter : 1,142mm / 44.96 inTail rotor diameter : 220mm / 8.66 inGear Ratio :13.64:1:4.26 (T11)12.5:1:4.26 (T12)Items needed to flyLithium-Polymer Battery (Li-Po) 6 Cell (22.2V) 2,600mAh-5,000mAhSize 46 x 60 x 160mm (maximum)Battery ConnectorsBattery ChargerTransmitter (140 CCPM capable) and receiverBrushless motor : Shaft diameter 5mm / KV 1,600 to 1,800ESC : Lipo 6cell 75A or moreTriple Axis Gyro SystemMini Servo (Swash×3,Rudder×1)Tools Required For AssemblyHexagon driver 1.5mm (No.61401)2mm (No.61402)2.5mm (No.61403)Wrench:4.5mmPhillips screw drivers (#0,#1,#2)Rule: 15cm or longerCA GlueEpoxy glue (Hardening time; 30 Min. or More)Thrust bearing grease (No.61597)Sandpaper #300 to 400Universal Pitch Gauge (No.60326)Other general tools required for making a model

JR NEX E6-550 Assembly Kit rc helicopter